1974 Ford Bronco Custom 4×4
Holley Motorsports just received on consignment this incredible Custom 1974 Bronco. This is an all new from the ground up build with all new custom components. This 1974 Ford Bronco 4×4 combines unmistakable first-generation Bronco styling with an extensive list of modern performance, suspension, braking, and comfort upgrades
The custom build for this stunning Competition Orange 1974 Ford Bronco was just completed in 2025. Its powertrain features a new Boss 351 V8 built to factory specs dynoed at 360HP, a 5 speed Silver Sport TR4050 Tremec, and an Advance Adapters custom built Atlas Transfer case, With a Ford 9” front and rear with 4:11 Traction lock and M&M locking hubs. It has a Stainless 2.5” Dual exhaust exiting out both sides. Dual Bilstein shocks all 4 corners with coil springs. Other details include a Kincer chassis, Dennis Carpenter all steel body (complete) Borgeson power steering, Wilwood 6 Piston disc brakes, E Stop electric E brake, 17×8.5” Method wheels, BFG Baja champion 285/70/R17 tires, and AMP Research deployable side steps with LED lights. The interior is custom made by Appearance Products, a B&B Autofab 8 point full roll cage with LED dome lights, power windows, Ididit Steering column, and Vintage Air climate control. Retrosound radio with Pioneer speakers. The car comes with complete build pictures and all receipts. This Bronco now shows 500 miles since it’s build, and it is offered with a Soft Top by Bestop, and a Michigan title in the seller’s name.
For more information call Holley Motorsports at 317-708-4761
Standard Equipment
Chassis
Heavy duty TIG welded ladder frame chassis with crumple zones
Fully independent front and rear suspension with limited slip rear differential.
Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.
Door hinge, steering column and windshield pickup-points incorporated onto main chassis.
Engines & Transmissions
Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.
Finishes
Aluminum finished firewall which dissipates engine heat.
Monza style filler with Locking gas cap.
17 gallon pressure tested stainless steel fuel tank.
Interior
Moto- Lita wood steering wheel original design.
Leather Seating Surfaces with adjustable Driver’s seat.
Carpeted interior and trunk.
Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.
Original style pedals, catches, fittings, shifter and hand brake lever.
Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.
Heater/defogger.
Original style latch and lock seat belts.
Hand made seats upholstered in German specification automotive leather.
Slide adjusters for driver’s seat.
Options
Chassis
Heavy duty TIG welded ladder frame chassis with crumple zones
Fully independent front and rear suspension with limited slip rear differential.
Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.
Door hinge, steering column and windshield pickup-points incorporated onto main chassis.
Engines & Transmissions
Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.
Finishes
Aluminum finished firewall which dissipates engine heat.
Monza style filler with Locking gas cap.
17 gallon pressure tested stainless steel fuel tank.
Interior
Moto- Lita wood steering wheel original design.
Leather Seating Surfaces with adjustable Driver’s seat.
Carpeted interior and trunk.
Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.
Original style pedals, catches, fittings, shifter and hand brake lever.
Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.
Heater/defogger.
Original style latch and lock seat belts.
Hand made seats upholstered in German specification automotive leather.
Slide adjusters for driver’s seat.
Specifications
Chassis
Heavy duty TIG welded ladder frame chassis with crumple zones
Fully independent front and rear suspension with limited slip rear differential.
Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.
Door hinge, steering column and windshield pickup-points incorporated onto main chassis.
Engines & Transmissions
Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.
Finishes
Aluminum finished firewall which dissipates engine heat.
Monza style filler with Locking gas cap.
17 gallon pressure tested stainless steel fuel tank.
Interior
Moto- Lita wood steering wheel original design.
Leather Seating Surfaces with adjustable Driver’s seat.
Carpeted interior and trunk.
Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.
Original style pedals, catches, fittings, shifter and hand brake lever.
Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.
Heater/defogger.
Original style latch and lock seat belts.
Hand made seats upholstered in German specification automotive leather.
Slide adjusters for driver’s seat.
Chassis
Heavy duty TIG welded ladder frame chassis with crumple zones
Fully independent front and rear suspension with limited slip rear differential.
Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.
Door hinge, steering column and windshield pickup-points incorporated onto main chassis.
Engines & Transmissions
Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.
Finishes
Aluminum finished firewall which dissipates engine heat.
Monza style filler with Locking gas cap.
17 gallon pressure tested stainless steel fuel tank.
Interior
Moto- Lita wood steering wheel original design.
Leather Seating Surfaces with adjustable Driver’s seat.
Carpeted interior and trunk.
Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.
Original style pedals, catches, fittings, shifter and hand brake lever.
Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.
Heater/defogger.
Original style latch and lock seat belts.
Hand made seats upholstered in German specification automotive leather.
Slide adjusters for driver’s seat.