MKIII

The Superformance MKIII is the only Cobra replica built under license from Carroll Shelby Licensing Inc.

What makes the MKIII so much better than its competitors? The Superformance MK3 is the only Cobra replica built under license from Carroll Shelby Licensing Inc. and this one is one incredible build.
Holley Motorsports just got back SPO3761 from an owner that can no longer drive this stunning Indigo Blue 427 Superformance MK3 Cobra. This car only has 880 miles and is 2 years old. The underside is as clean as the top. This car has an Arrington Speed Sport Windsor 427 built by Joey Arrington of NASCAR fame with 560 ft. lbs of torque and 540 HP., and a 5 speed Tremec TKX transmission. This car comes with, Tonneau cover, soft top and side curtains, owners manual, PPF on the front, door tops, rockers rear fender leading edge and underside. It sports 18″ original style Halibrand knock off wheels with Nitto 555 tires, new seat belts and harnesses, It has a high performance aluminum radiator with two thermostatically controlled fans, and an original spec oil cooler. When you open the hood the engine compartment is pure eye candy. With less than 900 miles this car is now fully sorted and ready to thunder.
The interior has hand made seats upholstered in German leather specified by the factory, fully carpeted floor, sides, center console and rear firewall, with new floor mats. All MK3’s have a period correct SC dash that houses Smith instrument gauges, Lucas toggle switches and a 180 mph reverse speedometer. All is in new condition

This might be the perfect color combination on a Cobra. Don’t let this one go as it is ready for delivery today at $119,900. You simply won’t find a Superformance Cobra this nice for this price. Call today and get the details on this fine ride.
We always do a very thorough technical inspection on every used and this car has had a very high end detail inside and out. This car is basically a new car and needs nothing
The Superformance MKIII is a meticulously engineered and crafted reproduction of the original, built under license from Carroll Shelby Licensing Inc. No expense was spared in recreating the legendary car, ensuring an authentic sports car experience.
The MKIII driving experience is like no other.

Standard Equipment

Chassis

Heavy duty TIG welded ladder frame chassis with crumple zones

Fully independent front and rear suspension with limited slip rear differential.

Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.

Door hinge, steering column and windshield pickup-points incorporated onto main chassis.

Engines & Transmissions

Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.

Finishes

Aluminum finished firewall which dissipates engine heat.

Monza style filler with Locking gas cap.

17 gallon pressure tested stainless steel fuel tank.

Interior

Moto- Lita wood steering wheel original design.

Leather Seating Surfaces with adjustable Driver’s seat.

Carpeted interior and trunk.

Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.

Original style pedals, catches, fittings, shifter and hand brake lever.

Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.

Heater/defogger.

Original style latch and lock seat belts.

Hand made seats upholstered in German specification automotive leather.

Slide adjusters for driver’s seat.

Options

Chassis

Heavy duty TIG welded ladder frame chassis with crumple zones

Fully independent front and rear suspension with limited slip rear differential.

Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.

Door hinge, steering column and windshield pickup-points incorporated onto main chassis.

Engines & Transmissions

Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.

Finishes

Aluminum finished firewall which dissipates engine heat.

Monza style filler with Locking gas cap.

17 gallon pressure tested stainless steel fuel tank.

Interior

Moto- Lita wood steering wheel original design.

Leather Seating Surfaces with adjustable Driver’s seat.

Carpeted interior and trunk.

Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.

Original style pedals, catches, fittings, shifter and hand brake lever.

Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.

Heater/defogger.

Original style latch and lock seat belts.

Hand made seats upholstered in German specification automotive leather.

Slide adjusters for driver’s seat.

Specifications

Chassis

Heavy duty TIG welded ladder frame chassis with crumple zones

Fully independent front and rear suspension with limited slip rear differential.

Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.

Door hinge, steering column and windshield pickup-points incorporated onto main chassis.

Engines & Transmissions

Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.

Finishes

Aluminum finished firewall which dissipates engine heat.

Monza style filler with Locking gas cap.

17 gallon pressure tested stainless steel fuel tank.

Interior

Moto- Lita wood steering wheel original design.

Leather Seating Surfaces with adjustable Driver’s seat.

Carpeted interior and trunk.

Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.

Original style pedals, catches, fittings, shifter and hand brake lever.

Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.

Heater/defogger.

Original style latch and lock seat belts.

Hand made seats upholstered in German specification automotive leather.

Slide adjusters for driver’s seat.

 

Chassis

Heavy duty TIG welded ladder frame chassis with crumple zones

Fully independent front and rear suspension with limited slip rear differential.

Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.

Door hinge, steering column and windshield pickup-points incorporated onto main chassis.

Engines & Transmissions

Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.

Finishes

Aluminum finished firewall which dissipates engine heat.

Monza style filler with Locking gas cap.

17 gallon pressure tested stainless steel fuel tank.

Interior

Moto- Lita wood steering wheel original design.

Leather Seating Surfaces with adjustable Driver’s seat.

Carpeted interior and trunk.

Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.

Original style pedals, catches, fittings, shifter and hand brake lever.

Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.

Heater/defogger.

Original style latch and lock seat belts.

Hand made seats upholstered in German specification automotive leather.

Slide adjusters for driver’s seat.

 

Request More Information

Name(Required)
This field is hidden when viewing the form