GT40 MKII
This Ken Miles Special Edition GT40 has been on order and is getting closer to production. Call us now to reserve this special MKII GT40 or to change up the order to YOUR personal specifications and avoid the 18 month wait.
A quality re-creation of the original that beat Ferrari and finished in the top three positions during the grueling Le Mans 24 Hours in 1966. While developing the exhilarating GT40 continuation, engineers went to great lengths to ensure authenticity. So authentic, that we can legally use the name “GT40”. The GT40 also carries the GT40/P chassis number and is eligible for the official GT40 registry.
The GT40 continuation is built to exacting standards – in fact over two thirds of the rolling chassis’s parts are interchangeable with that of an original car, including the ‘monocoque” style chassis.
The Superformance GT40 also boasts a pressed steel roof and beautifully finished body available in right and left hand drive.
Superformance GT40’s are built for the street and feature air conditioning standard just like the original GT40 street car P/1028
Standard Equipment
Chassis
Heavy duty TIG welded ladder frame chassis with crumple zones
Fully independent front and rear suspension with limited slip rear differential.
Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.
Door hinge, steering column and windshield pickup-points incorporated onto main chassis.
Engines & Transmissions
Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.
Finishes
Aluminum finished firewall which dissipates engine heat.
Monza style filler with Locking gas cap.
17 gallon pressure tested stainless steel fuel tank.
Interior
Moto- Lita wood steering wheel original design.
Leather Seating Surfaces with adjustable Driver’s seat.
Carpeted interior and trunk.
Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.
Original style pedals, catches, fittings, shifter and hand brake lever.
Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.
Heater/defogger.
Original style latch and lock seat belts.
Hand made seats upholstered in German specification automotive leather.
Slide adjusters for driver’s seat.
Options
Chassis
Heavy duty TIG welded ladder frame chassis with crumple zones
Fully independent front and rear suspension with limited slip rear differential.
Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.
Door hinge, steering column and windshield pickup-points incorporated onto main chassis.
Engines & Transmissions
Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.
Finishes
Aluminum finished firewall which dissipates engine heat.
Monza style filler with Locking gas cap.
17 gallon pressure tested stainless steel fuel tank.
Interior
Moto- Lita wood steering wheel original design.
Leather Seating Surfaces with adjustable Driver’s seat.
Carpeted interior and trunk.
Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.
Original style pedals, catches, fittings, shifter and hand brake lever.
Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.
Heater/defogger.
Original style latch and lock seat belts.
Hand made seats upholstered in German specification automotive leather.
Slide adjusters for driver’s seat.
Specifications
Chassis
Heavy duty TIG welded ladder frame chassis with crumple zones
Fully independent front and rear suspension with limited slip rear differential.
Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.
Door hinge, steering column and windshield pickup-points incorporated onto main chassis.
Engines & Transmissions
Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.
Finishes
Aluminum finished firewall which dissipates engine heat.
Monza style filler with Locking gas cap.
17 gallon pressure tested stainless steel fuel tank.
Interior
Moto- Lita wood steering wheel original design.
Leather Seating Surfaces with adjustable Driver’s seat.
Carpeted interior and trunk.
Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.
Original style pedals, catches, fittings, shifter and hand brake lever.
Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.
Heater/defogger.
Original style latch and lock seat belts.
Hand made seats upholstered in German specification automotive leather.
Slide adjusters for driver’s seat.
Chassis
Heavy duty TIG welded ladder frame chassis with crumple zones
Fully independent front and rear suspension with limited slip rear differential.
Jig-Welded parallel ladder frame of heavy wall 2″ x 4″ rectangular steel tubing with large diameter outriggers.
Door hinge, steering column and windshield pickup-points incorporated onto main chassis.
Engines & Transmissions
Installation kits are available for Ford 302, 351, 460 and 427/428 cubic inch engines with Tremec 5-speed or Ford top loader 4-speed transmissions. ZF Limited slip differential. Ratio 3:45:1 as standard equipment.
Finishes
Aluminum finished firewall which dissipates engine heat.
Monza style filler with Locking gas cap.
17 gallon pressure tested stainless steel fuel tank.
Interior
Moto- Lita wood steering wheel original design.
Leather Seating Surfaces with adjustable Driver’s seat.
Carpeted interior and trunk.
Original style Smith gauges and Lucas switches with Reverse 180mph speedometer.
Original style pedals, catches, fittings, shifter and hand brake lever.
Sun Visors, Side fitted wind wings with driver’s side and rear view mirrors.
Heater/defogger.
Original style latch and lock seat belts.
Hand made seats upholstered in German specification automotive leather.
Slide adjusters for driver’s seat.